Do you want to recapture that high gloss 'wet look' finish that is every boat owner's pride and joy? 3M™ Finesse-It™ II Finishing Material is ideal for the final polishing of fibreglass and painted boat surfaces. It does not contain wax or silicone and will remove minor scratches and light oxidation without leaving any swirl marks. To apply by hand, place a small amount of the white material on a clean cloth and apply it in a circular motion, rubbing to create a high gloss. For best results, the polish should be applied with a buffing machine. Simply apply enough of the material to spread over a 2'x 2' area and buff the surface, using light to moderate pressure, to create a high gloss finish. Marine Finishing Systems Finesse-It II Finishing Material is the recommended polishing step within our Marine Finishing System. This system takes you from the first sanding step through to the final finish wax with abrasives, compounds, glazes and waxes that offer the greatest value, high performance and increased productivity.
(800) 524-7517
