A "venturi" type of a valve that allows you to generate a vacuum from a positive pressure air line. Less expensive than a vacuum pump.
1/4" NPT Thread Fittings (female)
Multi-purpose vacuum bag sealant tape that will seal easily to our vacuum bags and your mold. Clean up is simple. 1/16" x 3/8" x 50 ft. per roll (1.6mm x 9.5mm x 15.4m)
High tack sealant tape that is wider and thicker than our AT-199. Excellent clean up. Roll size is 1/8" x 1/2" x 25 ft. (3.2mm x 12.7mm x 7.62m)
Nylon film, resistant to polyesters, epoxies and vinylester with excellent elongation and strength for contours. .0015 x 60" x 1000 ft. * Please Note: Our shipping calculator recognizes fiberglass, vacuum bagging materials and ...
* Please Note: Our shipping calculator recognizes fiberglass, vacuum bagging materials and ...
A heavier version of our Econo Ply J, used when extra strength is needed for removal. An excellent texture to the laminate surface is acheived, avoiding sanding/abraiding as a surface prep. 60"x 250 yd/roll * Please Note: Our ...
* Please Note: Our ...
A tight weave all white polyester peel ply to texture the laminate surface, avoiding sanding or abraiding as a surface prep for painting or bonding. 60" x 100 yards * Please Note: Our shipping calculator recognizes fiberglass, vacuum ...
* Please Note: Our shipping calculator recognizes fiberglass, vacuum ...
An open weave nylon peel ply with a red tracer, untreated, to texture laminate surface avoiding sanding or abraiding as a surface prep for painting or bonding. 60" x 25 yards * Please Note: Our shipping calculator recognizes ...
* Please Note: Our shipping calculator recognizes ...
Lightweight breather that allows you to pull "full" vacuum and remove volatiles without vacuum trap off that can warp laminates. 60" x 100 yards * Please Note: Our shipping calculator recognizes fiberglass, vacuum bagging
* Please Note: Our shipping calculator recognizes fiberglass, vacuum bagging
This release film provides excellent release from polyesters, vinylesters, and epoxies. 285°F (140°C) Good elongation and conformability. .001" x 60" x 1000 ft * Please Note: Our shipping calculator recognizes fiberglass, vacuum bagging
This perforated release film provides excellent release from polyesters, vinylesters, and epoxies. 285°F (140°C) The small hole perforations allow for bleeding and breathing. .001" x 60" x 1000 ft * Please Note: Our ...
Stretchlon 200 is green in color with a 250° F maximum temperature usage. Stretchlon 200 is ideal because it is able to stretch to compress every area of the mold. This high elongation vacuum bagging film is rated for temperatures up to 250°F and can stretch to 500% of its original length. Unlike traditional bagging film, ...
Designed to provide accurate, controlled vacuum that you can see and adjust. 1/4" NPT fittings
A negative pressure gauge that allows you to see how much vacuum pressure is actually on your laminate and if your vacuum bag is sealed or leaking. 1/4" NPT Thread Fitting (male)
A "through the vacuum bag" connector that allows you to easily pull vacuum. Work jointly with our AQD 500 quick disconnect. 1/4" NPT Thread Fitting (male)