as possible for a uniform finish.  Included in the bundle are a few dark accent strips.  Shipping is available in a 1/4" wall full length sonotube to ensure safe delivery ($15 charge applies.) Accent strips of Alaskan Yellow Cedar, Pine, Dark Meranti Mahogany and laminated White Ash & Mahogany are also available. Our standard bundle of 55 strips 16´ - 18´ long will build most canoes.  Larger canoes such as the Prospector, Nomad, Freedom 17/9, Kipawa, Winsk, Mattawa & Cirrus will require an additional 10 strips.

Bundle to do average 16´ to 17´ canoe (55 strips)                     
Bundle of 10 extra strips                                                                 
Extra full length cedar strips                                                            
Extra long strip bundle - All 18´ - 20´ (55 strips)                           
Accent strips - Alaskan Yellow Cedar, Pine or Mahogany              
Accent strips - laminated ash & mahogany - pair                             

Click here for INFO on our NEW short strip packages

Epoxy Covering Kits

West System Kit - Includes 2 - 105B Resin, 2 - 207SB Hardener, 1 - 303BC Pumps, 2 - 3-1/2" x 5" tapered squeeges, 12 yds 6 oz. x 60" Fiberglass Cloth.

East System Kit - Includes 2 - 1032B Resin, 2 - 834B Hardener, 1 - 301BC Pumps, 2 - 3-1/2" x 5" tapered squeeges, 12 yds 6 oz. x 60" Fiberglass Cloth,.

Carrying Yokes & Thwarts

We stock a good selection of carrying yokes in different profiles and typed of wood.  All of our yokes are sanded smooth and finished with a high quality marine spar varnish.

Regular yoke - flat contour - Ash or Cherry                                   
Deluxe yoke - dished - Ash or Cherry                                              
Super deluxe yoke - deep dish - ash or cherry made from 2" stock    

Red Tail Carrying Yokes (Super Deluxe, made from 1" stock on a angle.)

Birds Eye Maple                                                                           
Black Walnut or Black Cherry                                                          
White Ash or Sugar Maple                                                              
Thwart - Ash                                                                                
Hanging Kit for yokes & thwarts-4 brass 3" carr. bolts, nuts & washers

Gunwales

Gunwales are available in 2 different styles of either Cherry or White Ash. Our lumber is full length un-scarfed select quality that we purchase directly from the mill.
White Ash gunwale blank 3/4" x 3/4" square cut 17´ long (each)        
Cherry gunwale blank 3/4" x 3/4" square cut 17´ long (each)             
White Ash scuppered inwales 3/4" x 3/4" 17´ long (pair)                     
Cherry scuppered inwales 3/4" x 3/4" 17´ long (pair)                          
18´, 19´ & 20´ lengths are available in ash only, add $ 1.25 per foot

Seats

Four different styles of seats available in either Cherry or White Ash.  Our Seats are sanded and finished with a high quality marine spar varnish. All seat surfaces are 10-1/4" wide and available in 3 sizes.  Pricing is per seat.

     Small - 22" x 25" long.
     Large - 27" x 31" long. (add $ 1.00 to prices below per seat)
     X-Large - 31" x 34" long. (add $ 1.50 to prices below per seat)

Ash with bootlace or black webbing                                                  
Cherry with bootlace or black webbing                                             
Ash with cane inserts                                                                     
Cherry with cane inserts                                                                      

Seat hanging kit #1 (includes 8-3" ash or cherry drilled dowells with 4" brass carriage bolts,nuts & washers.Recommended for the smaller canoes.)

Seat hanging kit #2 (includes 4 cedar seat mounts and stainless steel threaded rod, nuts, washers and ash plugs.  Recommended for larger canoes.)

     Ash Cane Seat                             Cherry Bootlace Seat
(Click on the pictures to get a larger image.)

     Hanging Kit 1                                       Hanging Kit 2
(Click on the pictures to get a larger image.)

Decks

Pre made decks in a variety of woods. Pricing is as follows. You may also choose to buy a piece of lumber 24" x 6" x 1"or 2" to make your own decks(refer to the lumber page for pricing.
Cherry, Ash, Walnut or Tropical Mahogany 18" x 6" (pair.)         
Cherry or Ash with a tapered piece of Cherry or Ash
down the center 18" x 6" (pair.)                                                      
Walnut with a tapered piece of Cherry or Ash
down the center 18" x 6" (pair.)                                                      

Brass Stem Band & Hardware

3/8" x 3/32" Cove back stem band (4´,8´,12´ lengths only) price per ft.
Brass Screws for attaching Stem band (24 pcs # 4 - 3/4")                    
Brass Eye Bolt 1/4" x 2" with a 1/2" i.d. ring on the top                         
1-1/2" brass ring with brass eye strap with 2 #10 - 3/4" screws             

CNC Cut Station Moulds

Save yourself the time and the worry of getting your station moulds done correctly with a set of  these perfectly cut, extremely accurate station moulds made out of Medium Density Fiberboard.

Pricing is $ 229.00 per canoe design.
 

Feeling Ambitious?

Need a Router to go along with those bits?

A Porter Cable Model # 693PK Features a 1.5 HP unit with a fixed and  plunge base together in a kit with a handy storage case. There is also room in the case to store extra bits.

If you don't see something that you would like, chances are we have it and it's not listed here.  Please call or e-mail.

Please go to our online shopping cart based site for up to date pricing and to process online orders.  It is located at
http://www.noahsboatbuilding.com/noahs.

All the prices quoted are in CDN Dollars.
To e-mail Noah's click here