Noahsmarine Supplies *(Short Strip Kits - Courier shipping only) see kit page for details.

Customize your GUILLEMOT FAST DBL CEDAR STRIP KAYAK KIT

 
 
GUILLEMOT FAST DBL CEDAR STRIP KAYAK KIT

  Add this to my Cart

To take a printable version of this Kit Click here.
 
1
1
1
CANOE STRIP BUNDLE RED CEDAR 12-13' X 45 PCS 1
EXTRA CEDAR STRIPS 1/2" 12' + L 5
Titebond 3 Ultimate Wood Glue 32 Oz 1
1
East Resin .96 L 1
1
East Intermediate Hardener .19 L 1
Mini Pump Set For Group A B C 1
6oz X 38" Cloth 15
6oz X 2" Fiberglass Tape 15
Creature Comfort Seat - Highback 1
YAKIMA 14.5" FOOTBRACE RAIL (PR) 1
Yakima Touring Mounting Hardware (4 Ea) 1
YAKIMA TOURING FOOTPAD (PR) 1
YAKIMA 14.5" TOURING FOOTBRACE TRACK (PR) 1
1
Ash Stems 1/4" X 7/8" X 48" - 12 Pcs 1
Curved Tip Syringe 12cc 1
Latex Gloves Pair 5
Graduated Poly Tubs 32 Oz 2
9" Metal Tray 1
7" Cage Style Roller Frame 1
R195 Phenolic Core Foam Roller 7" 5
603 Resin Brush 1" 2
603 Resin Brush 2" 2
603 Resin Brush 3" 1
3m Gold 9" X 11" 80b 4
3m Gold 9" X 11" 120b 4
3m Gold 9" X 11" 180b 4
3m Gold 9" X 11" 240b 4
Yellow Spreader 3" X 5" 1
Brass Stem Band 4' Inc 12 X 4x3/4 Screws 8
Brass Flat Head #4 X 3/4" 20
Brass Eye Bolt 5/16" X 1-7/8" 1
Onyx Brush 2.5" 1
Minicell Seat Pad 3/4" X 24" X 24" 1




This design is the answer to a question to myself, "What would the Expedition Single look like stretched to make a double?" It is a fast, fun boat. The width is the same as the Expedition Single at 21 inches. Although this boat may appear a little unstable, its 25' 6" length gives it good stability. This is a boat for a pair of experienced paddlers who want to paddle together but don't want the compromises of a shorter and wider double. This is not intended as a racing boat, it is a high performance touring kayak suitable for intermediate to skilled paddlers. Beginners looking for a double should look at the Guillemot Double.

This boat moves easily. It consistently does very well in races such as the Blackburn Challenge. It is a little hard to get on and off the car, but, once in the water... ... no problem. Obviously with its length it is not a quick turner, but it is quick on the straight. The two paddlers are far enough apart that they do not interfere with each other at all. One paddler can stop and not cause problems for the other. The two paddlers can paddle a different cadences if they want. The boat also rolls very easily.

Length 25.5 feet 7.8 meters
Beam 21.0 inches 53.3 cm
Waterline Length 22.7 feet 6.9 meters
Waterline Beam 20.7 inches 52.6 cm
Design Displacement 446.0 lbs 202.3 kg
Draft 4.6 inches 11.7 cm
Wetted Area 34.1 sq ft 3.2 sq m
Waterplane Area 28.6 sq ft 2.7 sq m
Surface Area 83.0 sq ft 7.7 sq m
Approx. Bare Boat Weight 58.1 lbs 26.4 kg
Volume 22.1 cu ft 625.9 liters
Prismatic Coeff. 0.59      
Block Coeff. 0.50      
Lateral Plane Coeff. 0.73      
Sinkage 136.0 lbs/in 24.3 kg/cm
Moments to change trim 1 inch 175.0 foot pounds 237.3 kg/cm
Righting Moment at 1 degree 1.15 foot pounds 1.56 kg/cm

 




About our Cedar Strip Kits

Noah’s has been supplying canoe and kayak kits for over 25 years. Our kits include absolutely everything to build yourself a beautiful cedar strip canoe or kayak. Included in the kits are all the items shown below (quantities will vary based on the design - see the kit listing above to view the actual quantities supplied in the kit.)

  • Building Instruction Book - either Canoecraft, Kayak Craft or Strip built Sea Kayak.
  • Full Size set of Building Plans.
  • Full Length Western Red Cedar Bead & Cove strips.
  • Epoxy - Either MAS, System 3, WEST or EAST System epoxy with measuring pumps.
  • Premium fiberglass cloth, rolled on a tube to cover the inside & outside of your canoe or kayak.
  • Full Length Ash Gunwales for Canoes or Ash Rub rails for Kayaks.
  • Sheer clamps (kayaks - if required.)
  • Cockpit coaming materials (either Okoume or Cedar Strips.)
  • Brass Stem Bands with brass mounting screws.
  • Brass Eye bolts.
  • Ash Deck Blanks (for Canoes.)
  • Ash Cane Seats, one small one large and seat hanging kit (for Canoes.)
  • Ash Stems - precut 1/4" x 3/4" x appropriate length.
  • Custom molded seat, backrest and knee pads in minicell foam (for Kayaks.)
  • 3" Minicell foam for bulkheads, with adhesive to attach them.
  • Hatch Cover kits (if your design has hatches) and Tie down kits.
  • Ash Sculpted (Dished) Yoke and hardware (for Canoes.)
  • Premium Epifanes Yacht Varnish with a high quality bristle Varnish Brush.
  • Premium 3M Sandpaper (4 pcs of 80, 120, 180 & 240 grit.)
  • Dural Marine Glue to glue the strips together along with a small curved tip syringe to apply the glue.
  • Plastic measuring & mixing containers.
  • Metal paint tray & 7" roller handle.
  • 5 Epoxy resistant 7" low pile foam rollers & 5 Natural bristle disposable Epoxy brushes.
  • Plastic Squeege for applying the epoxy on the fiberglass.




Additions and Substitutions

We can substitute any of the items listed above with any item in our catalog, some examples:

  • Add CNC Cut station molds to any kit.
  • Don’t like Ash? Go with Cherry or even Walnut to finish your craft.
  • Any type of epoxy is available with your kit.
  • Already have something in the kit? We’ll subtract it and adjust the price.

Please contact us for a shipping quote.

 

 

 


Wish List
 




©Noah's Marine Supplies Online Store, All rights reserved.
Mail us at: noahs@noahsmarine.com