Length overall (standard) 18'-3"
Length overall (inboard) 17'-6"
Hull weight (approx.) 700 lbs.
Hull depth forward 3'-11"
Hull depth aft 2'-6"
Bottom width 4'-6"
Minimum recommended power 25 hp
Maximum engine/drive weight 500 lbs.
Power: Single well-mounted or transom mounted outboard standard. Short shaft motors not recommended. Inboard driving through outdrive or jet pump optional.
Hull type: Flat bottom dory-type hull aft. Developed for sheet plywood planking with outer rub strakes.
Can the hull be extended or shortened? Yes. Up to 3' by re-spacing the frames from the aft end of the stem to the transom a proportional amount, or by adding an additional frame. We do not recommend increasing the beam