CHARACTERISTICS Solvent free - Non-flammable - No toxic fumes - Is easily removed with water. MARINE STRIP is safe on all surfaces except Aluminum. Does not harm plastic. Is safe on G.R.P. Very efficient - Will remove up to 8 coats of paint in one operation. Will not affect 2 component or baked-on paints, polyurethane paint and varnishes. Does not evaporate - Long active work time. Easy to apply Gel - With prolonged stripping action. Does not run. GENERAL RECOMMENDATIONS Always try a sample area first. To apply the product use a flat blade or a brush with synthetic (nylon) “bristles”. Wear proper protective clothing, gloves. For best results on wood, do not let MARINE STRIP work longer than required to dissolve the paint. “Weak” wood like some veneers or plywoods may be damaged. Hardwood, especially those rich in tannins (oak, exotic wood,…) can turn dark if in prolonged contact with MARINE STRIP. Where MARINE STRIP has darkened the wood DO NOT allow it to dry, prior to using DECK CLEANER Correctly used, MARINE STRIP can easily be removed, then neutralized with DECK CLEANER which will restore the original even colour. Ask for technical information when you buy the product. APPLICATION Apply a thick coat of MARINE STRIP over the whole surface to be stripped. Let the product work. To remove MARINE STRIP and dissolved paint, rinse very thoroughly with fresh water and a brush or pressure washer (max. 60bars/870psi). The use of hot water makes the job easier. Note : porous surfaces like wood must always be neutralized with DECK CLEANER after removing Marine Strip. STORAGE DO NOT use metal containers to store product. Keep from freezing and away from high temperatures.