Endeavour Cedar Strip Kayak Kit : Kit-endeavour : Noahsmarine.com

Endeavour

The beauty of this kayak will hit you when you first set up the station molds. It is sleek, graceful and a dream to paddle. Perfect for day trips or week long excursions, you will find the boat tracks well, goes fast and behaves itself in waves. Mike O'Brien, senior editor of WoodenBoat Magazine had this to say: "the sharply raked stem and well shaped forward sections will provide increasing buoyancy as the Endeavour punches into large waves. The fine run, and nearly vertical sternpost, will help ensure positive control when we are running off in a big sea (one of the scariest elements of sea kayaking). In all, this hull has a friendly and competent look to it."

Length 17'
Maximum beam 23.5"
Beam waterline 22"
Beam gunnel 23.5"
Bow height 14"
Centre depth 7.5"
Draft 4"
Displacement 280 lbs.
Wetted surface 21.8 sq. ft.
Weight to immerse 97 lb/in.
Prismatic coefficient 0.561
Weight 45 to 50 lbs
Cockpit opening 31" x 15.5"

About our Cedar Strip Kits Noah’s has been supplying canoe and kayak kits for over 25 years. Our kits include absolutely everything to build yourself a beautiful cedar strip canoe or kayak. Included in the kits are all the items shown below (quantities will vary based on the design - see the kit listing above to view the actual quantities supplied in the kit.)

Building Instruction Book - either Canoecraft, Kayak Craft or Strip built Sea Kayak.
This Canoe Kit does not include Plans, they must be ordered separately from the designer, or built using the offsets in Kayakcraft.
Full Length Western Red Cedar Bead & Cove strips.
Epoxy - Either MAS, System 3, WEST or EAST System epoxy with measuring pumps.
Premium fiberglass cloth, rolled on a tube to cover the inside & outside of your canoe or kayak.

Full Length Ash Gunwales for Canoes or Ash Rub rails for Kayaks.
Sheer clamps (kayaks - if required.)
Cockpit coaming materials (either Okoume or Cedar Strips.)
Brass Stem Bands with brass mounting screws.
Brass Eye bolts.
Ash Deck Blanks (for Canoes.)
Ash Cane Seats, one small one large and seat hanging kit (for Canoes.)
Ash Stems - precut 1/4" x 3/4" x appropriate length.
Custom molded seat, backrest and knee pads in minicell foam (for Kayaks.)
3" Minicell foam for bulkheads, with adhesive to attach them.
Hatch Cover kits (if your design has hatches) and Tie down kits.
Ash Sculpted (Dished) Yoke and hardware (for Canoes.)
Premium Epifanes Yacht Varnish with a high quality bristle Varnish Brush.
Premium 3M Sandpaper (4 pcs of 80, 120, 180 & 240 grit.)
Dural Marine Glue to glue the strips together along with a small curved tip syringe to apply the glue.
Plastic measuring & mixing containers.
Metal paint tray & 7" roller handle.
5 Epoxy resistant 7" low pile foam rollers & 5 Natural bristle disposable Epoxy brushes.
Plastic Squeege for applying the epoxy on the fiberglass.

Additions and Substitutions

We can substitute any of the items listed above with any item in our catalog, some examples:

Add CNC Cut station molds to any kit.
Don’t like Ash? Go with Cherry or even Walnut to finish your craft.
Any type of epoxy is available with your kit.
Already have something in the kit? We’ll subtract it and adjust the price.

Please contact us for a shipping quote.

Customize your ENDEAVOUR CEDAR STRIP KAYAK KIT