Hello and welcome to our community! Is this your first visit?
Register
Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2011
    Posts
    12

    Sanding the inside

    Its unclear to me how much to sand the inside of the Huron Cruiser I'm building. I just did 2 coats of epoxy as recommended to leave some of the weave for traction. However that leaves a different surface to sand than the outside. Do I just sand the outside of the weave?

  2. #2
    Join Date
    Mar 2001
    Posts
    399
    Best to leave the inside unsanded for traction. Just scrub the inside with a Scotchbrite pad and detergent to remove any blush, wash thoroughly with clean water and varnish.

  3. #3
    Join Date
    Nov 2011
    Posts
    12
    ok, great, less sanding thanks


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •