Hello and welcome to our community! Is this your first visit?
Register
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2002
    Location
    Toronto
    Posts
    2

    fairing stitch and glue Fife

    Being new to the Forum I think I posted this in the wrong place yesterday. Any suggestions?

    I am building a stitch and glue Fife rowboat, a multichine design. My strakes do not meet as evenly as they should, I now realize after filleting. I think that before fiberglassing the outside of the hull, I should either sand down the edge of the strakes that project too far, or fill with thickened epoxy to bring up to level the strakes that don't. The ov erlap is not really terrible but there are places where I don't think the fiberglas would make the turn as it is.

    So which do I do? Sand or fill? Or a combination?

    And if I fill, what is the best thing to add to the epoxy -- wood flour or cabosil or something else?

    Thanks

    Robin


    __________________
    robin brass

  2. #2
    Join Date
    Jan 2004
    Location
    northwestern Wisconsin
    Posts
    14
    Robin,

    I would concentrate on taking down the strakes which project too far. Always keep an eye on the surrounding area so you don't over do the sanding. I think you might be surprised to see some of the places that do not come out far enough will "dissapear" after sanding the high spots.

    In some of the work I have done, wood flour has worked very well. I have never had to fill areas larger than 1" x 3" but found a ratio of 1:4 was about right (1 part w.f.).

    Andy


 

Similar Threads

  1. New Website on Stitch and Glue
    By boatbuilder.org in forum Stitch & Glue Construction Forum
    Replies: 0
    Last Post: 01-01-2005, 11:01 PM
  2. Stitch & Glue process ???
    By Slo Mo in forum Other Questions ?
    Replies: 0
    Last Post: 10-18-2003, 04:47 PM
  3. Stitch and glue question
    By kenthunter in forum Stitch & Glue Construction Forum
    Replies: 1
    Last Post: 09-20-2003, 07:31 PM
  4. fairing stitch and glue Fife
    By robin brass in forum Other Questions ?
    Replies: 1
    Last Post: 10-18-2002, 09:03 PM
  5. supplies for stitch and glue
    By klt in forum Stitch & Glue Construction Forum
    Replies: 2
    Last Post: 07-26-2002, 02:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •