Hello and welcome to our community! Is this your first visit?
Register
Results 1 to 4 of 4

Thread: canoe dolly

Hybrid View

  1. #1
    Join Date
    Mar 2005
    Location
    ontario canada
    Posts
    29

    canoe dolly

    I have a 16ft. Peterbourgh canoe that was built in the late 20's.It weights about 95 lbs. dry and picks up another 30 or so wet.It's a dream to paddle but a brute carry.Last year on vacation I saw a guy with a set of dolly wheels under one end of his canoe and was pulling is along by the other end.I did'nt get a chance to talk to him,and have not been able to find any.Does anyone know what i'm talking about and where I could find one? I live in eastern ontario. Thanks.

  2. #2
    Join Date
    Jan 2006
    Location
    Fort St. John BC. Canada
    Posts
    7

    Canoe Dolly

    I seem to remember seeing somthing like that in the classified section of Wood Boat magazine. Or you could make your own with a couple off bicycle wheels ,an axle and a sling.

  3. #3
    Join Date
    Jan 2006
    Posts
    10
    I did a search on Google for >canoe cart, dolly< and came up with a gazillion different places that sell them. I have seen some homemade ones on the net but haven't been able to track them down.

    Steve

  4. #4
    Join Date
    Feb 2006
    Location
    Ontario, Canada
    Posts
    7

    cheap canoe dolly

    I built a dolly for my 15 ft canoe that works well, it also works with my 10 ft kayak. I cut a piece of 3/8 ply about 2 ft square and cut out a hole shaped to fit the boat, about a couple of feet from one end. On the bottom I attached two lawn motor replacement wheel, which are only a few dollars, using the replacement stud axles which were also available from the local farmer's cooperative store; a lot of hardware stores carry these.

    The device slips over the end of the canoe and is held in place by a bungy cord between its top edge and the nearest seat.

    It has been working great for several years now. I modified the hole so it also accepts my kayak.

    A profiler tool is useful for this job; it looks like a steel comb with movable teeth and is available for a few dollars from virtually any hardware store.

    Ancient Kayaker


 

Similar Threads

  1. square stern canoe?
    By fisher123 in forum Cedar Strip Construction Forum
    Replies: 2
    Last Post: 03-22-2008, 06:34 PM
  2. Building a canoe without a pattern?
    By sneakbox in forum Composite Boatbuilding
    Replies: 2
    Last Post: 12-22-2006, 10:16 PM
  3. hurricaned destroyed canoe
    By mah772 in forum Other Questions ?
    Replies: 4
    Last Post: 11-18-2006, 08:47 PM
  4. Canoe
    By Boats_are_fun in forum Cedar Strip Construction Forum
    Replies: 2
    Last Post: 03-28-2006, 01:08 PM
  5. New Canoe Building Plans
    By JEM in forum Stitch & Glue Construction Forum
    Replies: 0
    Last Post: 03-28-2006, 11:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •