Hello and welcome to our community! Is this your first visit?
Register
Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2008
    Posts
    1

    Question Fiberglassing Bow and Stern Stems

    I'm building a Redbird and it's ready to fiberglass (yeah) ... but I'm wondering about fiberglassing the bow and stern stems. Should I cut the fiberglass flush such that is does not lap over the stems or should the fiberglass lap over the stem pieces? Planning on installing brass stem bands to finnish the bow/stern. Thanks in advance for any advice!!

  2. #2
    Join Date
    Apr 2000
    Location
    Burlington, ON
    Posts
    10
    Hi Fred,

    Cut the glass so it will overlap the stem pieces by about 1/2". After you're done epoxying and sanding you wont be able to see the overlap.

    Jason @ Noah's

  3. #3
    Join Date
    Nov 2008
    Posts
    11
    Jason,
    Looking for some literature,guide etc.,for restoration of a Peterborough Lakeside.
    Do you folks sell such an item?
    Thanks,
    Bill McNamara
    Picton, On.

  4. #4
    Join Date
    Mar 2001
    Posts
    399
    Lots of general info, but nothing specific to the Peterborough's


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •