Noah's can custom cut Marine Plywood, Foam Core, Coosa Board, or anything else. 5 foot by 10 foot table, 6 inch depth. Send us your dxf file or any vector based graphic for a quote.
105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. ...
Fast Cure Marine Adhesive & Sealant. Sealing is simply applying a protectant to keep ...
A premium, aluminum oxide mineral, an improved paper backing, and total construction. Performance advantages: improved rate of cut, increased flexibility, increased abrasive life and uniform, consistent finish.
3M™ Marine Adhesive Sealant 5200 is a one-component, high-strength, moisture-curing, gap-filling polyurethane for permanent bonding of wood, gelcoat and fiberglass. It cures to form a firm, rubbery, waterproof seal on joints and boat hardware, above and below the waterline. This product has been trusted throughout the ...
Top quality solid teak battens, all options measure 3/8" (9mm) in thickness and are 5' in length.
Corecell M-Foam has been developed to deliver one product for all Marine applications. It provides a unique combination of high shear strength with low density, high elongation, high temperature resistance and low resin uptake. Corecell M-Foam is the performance leader whether your ...
Bundle of (64 pcs 16' to 17') Precision Milled Full Length Western Red Cedar Strips. Bundles are assembled with either a mixture of light and dark strips or all light colored strips only (specify when ordering.) A 64 strip bundle is more than enough to build most canoes up to 32" beam and ...
Epifanes Clear Varnish, known around the world, is considered the ultimate in a high gloss finish. This traditional marine varnish is based on tung oil, phenolic-modified alkyd resins and ...
Deks Olje is a two-part finishing system that prides itself on low maintenence. deks olje D1 is a matte finish, if you are looking for a flat finish D1 is the only necessary step. If a high gloss finish is desired Deks Olje D2 can easily be applied over top of D1. This produces a high gloss finish that is slightly softer than ...
Okoume (African hardwood) faces & core, 60" x 120" 1.3 mm face veneers (before sanding.) Equal or nearly equal laminations. Water and boil proof (WBP) glue. Color is light brown to pink, grain patterns tend to be large curves throughout the sheet. Not as impact and rot resistant as Meranti or Sapele but about 10 to ...
The standard fastener for many boatbuilding and exterior woodworking projects. Flat head screws install flush with the surface or are countersunk and the hole is plugged. These Stainless Steel Machine Screws are perfect for the marine environment. This is what all the big production boatbuilders use. There are also a million ...
E-type glass. Epoxy and polyester compatible. This material is typically used in small boat construction where a thin, smooth, transparent & light weight finish is desired. Provides additional strength & abrasion resistance. Available in 4 different weights in ...
ProspectorThe Chestnut Canoe Company built this "workhorse of the North" to meet the specific needs of the prospector - good maneuverability through whitewater and wilderness, with capacity to ...
B/BB Meranti Mahogany face veneers, 1 mm before sanding. Equal or nearly equal core laminations. Water and boil proof glue. Excellent structural plywood.
Two-component polyester saturated aliphatic urethane finish.Exterior topsides and interior use. Finishing coat for fiberglass, steel, aluminum and wood. For use on all epoxy primed substrates or direct application on unpainted wood or thoroughly cleaned and degreased fiberglass ...
S-1 is a two-part transparent epoxy sealer. Intended for marine use, it will act as a waterproof and chemical resistant primer on a variety of substrates including wood, concrete, metal, and fiberglass.
Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof.
One-component yacht coating based on oil modified alkyd resins.