Airtech International

VACUUM VENTURI BLOCK w SILENCER
	A "venturi" type of a valve that allows you to generate a vacuum from a positive pressure air line. Less expensive than a vacuum pump. Your Price: $ 96.75  per EACH Qty:    EACH More Info

AIRTECH QUICK DISCONNECT 1/4 NPT w BARB FITTINGS
	1/4" NPT Thread Fittings (female) with barbed fitting attachment Your Price: $ 33.75  per EACH Qty:    EACH More Info

AIR TECH AT1993 1/16"X 3/8"x 50' BAG SEALING TAPE
	Multi-purpose vacuum bag sealant tape that will seal easily to our vacuum bags and your mold. Clean up is simple. 1/16" x 3/8" x 50 ft. per roll (1.6mm x 9.5mm x 15.4m) Qty 1 12 Price $ 7.31 $ 6.59 Qty:    ROLL More Info

AIRTECH AT200Y 1/8" X 1/2" X 25' BAG SEALING TAPE
	High tack sealant tape that is wider and thicker than our AT-199. Excellent clean up. Roll size is 1/8" x 1/2" x 25 ft. (3.2mm x 12.7mm x 7.62m) Qty 1 12 Price $ 6.00 $ 5.40 Qty:    ROLL More Info

AIRTECH ECONOLON BAGGING FILM 0015 60"
	Nylon film, resistant to polyesters, epoxies and vinylester with excellent elongation and strength for contours. .0015 x 60" x 1000 ft. *  Please Note:  Our shipping calculator recognizes fiberglass, vacuum bagging materials and ... Qty 1 20 333 Price $ 1.31 $ 1.19 $ 1.05 Qty:    YD More Info

AIRTECH ECONOPLY PEEL PLY 60"
	A heavier version of our Econo Ply J, used when extra strength is needed for removal. An excellent texture to the laminate surface is acheived, avoiding sanding/abraiding as a surface prep. 60"x 250 yd/roll *  Please Note:  Our ... Qty 1 20 250 Price $ 3.90 $ 3.51 $ 3.12 Qty:    YD More Info

AIRTECH ECONOPLY J PEEL PLY 60"
	A tight weave all white polyester peel ply to texture the laminate surface, avoiding sanding or abraiding as a surface prep for painting or bonding. 60" x 100 yards *  Please Note:  Our shipping calculator recognizes fiberglass, vacuum ... Qty 1 20 100 Price $ 3.19 $ 2.87 $ 2.55 Qty:    YD More Info

AIRTECH ECONO STITCH PEEL PLY WITH RED TRACER 300YD
	An open weave nylon peel ply with a red tracer, untreated, to texture laminate surface avoiding sanding or abraiding as a surface prep for painting or bonding. 60" x 25 yards *  Please Note:  Our shipping calculator recognizes ... Qty 1 20 300 Price $ 4.88 $ 4.39 $ 3.90 Qty:    YD More Info

AIRTECH ECONOWEAVE 44 BREATHER 60"
	Lightweight breather that allows you to pull "full" vacuum and remove volatiles without vacuum trap off that can warp laminates. 60" x 100 yards *  Please Note:  Our shipping calculator recognizes fiberglass, vacuum bagging Qty 1 20 100 Price $ 2.63 $ 2.36 $ 2.10 Qty:    YD More Info

AIRTECH GREEN FLOW 75 INFUSION NETTING 41"
	Efficiently distributes resin with little waste due to the low profile, tight construction. 41” x 350 ft *  Please Note:  Our shipping calculator recognizes fiberglass, vacuum bagging materials and any other item that is Qty 1 20 117 Price $ 3.00 $ 2.70 $ 2.40 Qty:    YD More Info

AIRTECH DAHLAR RELEASE FILM 1ML 60"
	This release film provides excellent release from polyesters, vinylesters, and epoxies. 285°F (140°C) Good elongation and conformability. .001" x 60" x 1000 ft *  Please Note:  Our shipping calculator recognizes fiberglass, vacuum bagging Qty 1 20 333 Price $ 1.16 $ 1.05 $ 0.93 Qty:    YD More Info

AIRTECH DAHLAR RELEASE FILM PERFORATED 1ML 60"
	This perforated release film provides excellent release from polyesters, vinylesters, and epoxies. 285°F (140°C) The small hole perforations allow for bleeding and breathing. .001" x 60" x 1000 ft *  Please Note:  Our ... Qty 1 20 333 Price $ 1.99 $ 1.79 $ 1.59 Qty:    YD More Info

AIRTECH SAFELEASE 30 - 1 GALLON
	SafeleaseŽ 30 is a non-silicone waterbased PTFE release liquid. It will release any laminate from any type of mold surface and will withstand temperatures up to 450° F(232° C). Your Price: $ 176.25  per GALLON Qty:    GALLON More Info

AIRTECH VACUUM REGULATOR
	Designed to provide accurate, controlled vacuum that you can see and adjust. 1/4" NPT fittings Your Price: $ 131.25  per EACH Qty:    EACH More Info

AIRTECH VAC GAUGE 30
	A negative pressure gauge that allows you to see how much vacuum pressure is actually on your laminate and if your vacuum bag is sealed or leaking. 1/4" NPT Thread Fitting (male) Your Price: $ 63.75  per EACH Qty:    EACH More Info

AIRTECH VACUUM VALVE 401C
	A "through the vacuum bag" connector that allows you to easily pull vacuum. Work jointly with our AQD 500 quick disconnect. 1/4" NPT Thread Fitting (male) Your Price: $ 26.25  per EACH Qty:    EACH More Info