Airtac 2 MEGA is a spray rubber adhesive designed for temporary bonds. Airtac 2 MEGA can be used on materials needing extra tack for placement on vertical or difficult surface areas. This product is ideally suited for tool shop applications such as temporary placement of details and pattern fabrication.
A "venturi" type of a valve that allows you to generate a vacuum from a positive pressure air line. Less expensive than a vacuum pump.
1/4" NPT Thread Fittings (female)
Multi-purpose vacuum bag sealant tape that will seal easily to our vacuum bags and your mold. Clean up is simple. 1/16" x 3/8" x 50 ft. per roll (1.6mm x 9.5mm x 15.4m)
High tack sealant tape that is wider and thicker than our AT-199. Excellent clean up. Roll size is 1/8" x 1/2" x 25 ft. (3.2mm x 12.7mm x 7.62m)
<p>Econotac 2 is an economical rubber based contact spray adhesive, designed for temporary bonding applications.<br />Econotac 2 can be used to hold dry fabric, core and processing materials in place when utilizing resin infusion and other composite fabrication processes.<br />Econotac 2 has a wide conical spray pattern for ...
Nylon film, resistant to polyesters, epoxies and vinylester with excellent elongation and strength for contours. .0015 x 60" x 1000 ft. <p><font color="#ff0000">* Please Note: <span style="mso-ansi-language: EN-CA" lang="EN-CA">Our shipping calculator recognizes fiberglass, vacuum bagging materials and ...
Nylon film, resistant to polyesters, epoxies and vinylester with excellent elongation and strength for contours. .0015 x 60/120" c fold x 500 ft.<br /><br /> <p><font color="#ff0000">* Please Note: <span style="mso-ansi-language: EN-CA" lang="EN-CA">Our shipping calculator recognizes fiberglass,
A heavier version of our Econo Ply J, used when extra strength is needed for removal. An excellent texture to the laminate surface is acheived, avoiding sanding/abraiding as a surface prep. 60"x 250 yd/roll <p><font color="#ff0000">* Please Note: <span style="mso-ansi-language: EN-CA" lang="EN-CA">Our ...
A tight weave all white polyester peel ply to texture the laminate surface, avoiding sanding or abraiding as a surface prep for painting or bonding. 60" x 100 yards <p><font color="#ff0000">* Please Note: <span style="mso-ansi-language: EN-CA" lang="EN-CA">Our shipping calculator recognizes fiberglass, vacuum ...
An open weave nylon peel ply with a red tracer, untreated, to texture laminate surface avoiding sanding or abraiding as a surface prep for painting or bonding. 60" x 25 yards <p><font color="#ff0000">* Please Note: <span style="mso-ansi-language: EN-CA" lang="EN-CA">Our shipping calculator recognizes ...
Lightweight breather that allows you to pull "full" vacuum and remove volatiles without vacuum trap off that can warp laminates. 60" x 100 yards <p><font color="#ff0000">* Please Note: <span style="mso-ansi-language: EN-CA" lang="EN-CA">Our shipping calculator recognizes fiberglass, vacuum bagging
Vacuum Reservoir RB 451 is designed to collect excess resin during the infusion process and prevent damage to your vacuum pump. 2.5 gallon tank size, comes complete with polyethylene liner, vacuum regulator/gage, quick disconnect coupling, and two barbed fittings for 5/8" and 3/4" I.D. hose.
This release film provides excellent release from polyesters, vinylesters, and epoxies. 285°F (140°C) Good elongation and conformability. .001" x 60" x 1000 ft <p><font color="#ff0000">* Please Note: <span style="mso-ansi-language: EN-CA" lang="EN-CA">Our shipping calculator recognizes fiberglass, vacuum bagging
This perforated release film provides excellent release from polyesters, vinylesters, and epoxies. 285°F (140°C) The small hole perforations allow for bleeding and breathing. .001" x 60" x 1000 ft <p><font color="#ff0000">* Please Note: <span style="mso-ansi-language: EN-CA" lang="EN-CA">Our ...
(800) 524-7517
