Noahsmarine Supplies *(Short Strip Kits - Courier shipping only) see kit page for details.



Brand List
Product Groups


Product Groups A-Z


Cedar Strip Canoe Plans & Kits
Cedar Strip Kayak Plans & Kits
Caulking & Sealants
Stitch & Glue Canoe & Kayak Plans & Kits
Boat Plans And Kits
Marine Plywood & Panels
Paints And Varnishes
Boat Lumber
Books, Magazines & Videos
Canoe/Kayak Building Materials & Access.
Cleaning & Polishing
Core Materials
Epoxy Resins,Fillers Putties & Adhesives
Lonseal Longwood Marine Flooring
Fasteners
Fiberglass/Carbon/Kevlar
Marine Carpet
Seadek
Polyester/Gelcoat/Acetone
Safety Supplies
Brushes, Rollers,Mixing Containers, Etc.
Tapes
Teak Moldings & Accessories
Vacuum Bagging Supplies
New 2018
Tools & Accessories



System 3

 

Quick Cure


Quick Cure-5 is the standard quick setting "five minute epoxy" system. Mix at a 1:1 by volume ratio. Quick Cure is ideal for all small jobs requiring a strong bond and rapid cure. Quick Cure is highly water resistant but not waterproof. Quick Cure is quite thick, but is easily measured by squeezing equal sized lumps from the convenient application bottles.

Rotfix


RotFix is a 2-component, solvent-free, easy-to-use pourable epoxy resin product. RotFix penetrates deep into deteriorated and rotted wood, creating a strong, solid base for restoration. After RotFix application, a patch may be built up with System Three SculpwoodTM. Sculpwood is a kneadable, moldable, epoxy putty. After curing, Sculpwood can be finished like the original wood. Together they make a high-quality, permanent, wood restoration system.

Sculptwood


SculptWoodŽ is a moldable, carvable, sandable epoxy putty for replacement of damaged wood. Ideal for replacing missing sections of windowsills, frames and furniture or adding new sections to existing sections. SculptWood will accept paint, screws and nails. Porous, rotted or deteriorated wood should first be treated with a low viscosity system such as Rotfix.

System 3 Ez-Fillet


EZ-Fillet is a wood flour-filled two-part putty specifically designed for stitch-and-glue wooden boat construction. Its ketchup-like, self-leveling consistency allows it to be measured by volume or weight. The resin (part A) is brick red in color while the hardener (part B) is a deep, dark green. A rich brown wood tone results when the two parts are combined indicating complete mixing. The putty thickens after mixing to form an easy to spread thixotropic compound which will not run or sag. EZ-Fillet has been designed for superior strength and workability and can be used by itself to create

System 3 Gelmagic


GelMagic is a toughened, non-sagging, two component, structural epoxy adhesive designed for superior bonding to wood and most porous materials. It is unique in that it starts as two self-leveling liquids, which form a soft, thixotropic, sag-resistant paste when mixed. Measuring is easily accomplished by either volume or weight. GelMagic requires no additional modification with fillers and can be applied to vertical and overhead surfaces without running, eliminating the mess and waste associated with other epoxies. GelMagic exhibits exceptionally high peel strength and employs a state of the ...

System 3 Silvertip Laminating Resin


SilverTip Laminating Resin is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-composite boatbuilding. It will outperform any other product in these applications. SilverTip Laminating Resin is designed for use with fiberglass, Kevlar, Dynel and graphite as well as on bare wood. It has superior wet-out characteristics with little tendency to foam or trap air. Both the resin and hardener are nearly colorless and are used in an easy 2:1 volumetric ratio. SilverTip Laminating Resin cures to a brilliant blush-free film ...

System 3 Quik Fair


QuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded parts have a non-sagging, butter-like consistency and are easily mixed to form a third color. At 25°C (77°F) QuikFair is sufficiently cured to be hand-sanded in 3 hours or machine sanded in 4 hours. This allows the user to apply three coats each 24 hours in a standard eight-hour shift or six in a round-the-clock basis.
 
 


Wish List
 




©Noah's Marine Supplies Online Store, All rights reserved.
Mail us at: noahs@noahsmarine.com