MAS Low Viscosity Epoxy Resin is a blend of standard low molecular weight epoxy resin and reactive diluents. Formulations based on MAS Low Viscosity Epoxy Resin are typically cured at room temperatures using MAS hardener in a 2:1 mix ratio, resin: hardener. MAS Low Viscosity Epoxy Resin can be used in a wide variety of ...
MAS Calibrated Resin Pump Set Contains both the 8cc and 4cc pumps. For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers of MAS and Cool Cure Resin
MAS Medium Hardener is a polyamine blend intended for moderate reactivity and resistance to amine blushing. Moderate pot life, gel, and thin film set times provide advantages when filleting and fairing. MAS Epoxy/Medium mixed with thickeners, gel and set quickly enough to avoid draining and sagging, while still allowing ample ...
Introducing F.L.A.G. Resin Filleting, Laminating and Gluing Resin F.L.A.G. Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. The medium viscosity allows for the incorporation of fillers when fairing putties, gluing slurries and filleting systems are required. ...
The MAS “Infusion” Systems are formulated for high performance composite construction.Filament winding, wet pregnation, RTM and pultrusion manufacturing processes will all benefit from the easy handling, high strength and exceptional toughness of the InfuCure Systems.
MAS Slow Hardener is a phenol-free, modified amine, epoxy resin hardener. When used in conjunction with MAS Epoxy Resin it provides high reactivity and an extended gel time which allows for controlled application periods. Special features exhibited by this product include blush free surfaces, good ultraviolet stability, smooth ...
The low viscosity of Fast Hardener allows for quick wet-out of the heavy reinforcing fabrics often used in repair applications. MAS Non-Blushing Fast Hardener is a room temperature rapid hardener for use with MAS Epoxy Resins. Fast Hardener can also be used as an accelerator for the MAS Slow or Medium Hardeners when ...
The MAS “Infusion” Systems are formulated for high performance composite construction. Filament winding, wet pregnation, RTM and pultrusion manufacturing processes will all benefit from the easy handling, high strength and exceptional toughness of the InfuCure Systems.
Our ONLY 1:1 ratio epoxy adhesive -- This stuff is FAST!! It’s great for quick repairs and bonding. Mix small amounts - no more than 1/2 oz. of each of the resin and hardener at a time. You’ll have 1-2 minutes to use it, and 5-10 minutes to set it. You can sand in 1 hour, and full cure is in 4-6 hours.
(800) 524-7517
