This perforated release film provides excellent release from polyesters, vinylesters, and epoxies. 285°F (140°C) The small hole perforations allow for bleeding and breathing. .001" x 60" x 1000 ft
<p><font color="#ff0000">* Please Note: <span style="mso-ansi-language: EN-CA" lang="EN-CA">Our ...
inexpensive polyethylene parts, used to connect the vacuum manifold and resin feed lines for low temperature resin infusion projects. RIC 12 is used with a 1/2" O.D. tubing and the RIC 58 is used with 5/8" O.D. tubing.
Stretchlon 200 is green in color with a 250° F maximum temperature usage.
Stretchlon 200 is ideal because it is able to stretch to compress every area of the mold. This high elongation vacuum bagging film is rated for temperatures up to 250°F and can stretch to 500% of its original length. Unlike traditional bagging film, ...
Designed to provide accurate, controlled vacuum that you can see and adjust. 1/4" NPT fittings
A negative pressure gauge that allows you to see how much vacuum pressure is actually on your laminate and if your vacuum bag is sealed or leaking. 1/4" NPT Thread Fitting (male)
A "through the vacuum bag" connector that allows you to easily pull vacuum. Work jointly with our AQD 500 quick disconnect. 1/4" NPT Thread Fitting (male)