Items

Airtac 2 is a spray rubber adhesive designed for temporary bonds. Airtac 2 can be used on materials needing extra tack for placement on vertical or difficult surface areas. This product is ideally suited for tool shop applications such as temporary placement of details and pattern fabrication.

A "venturi" type of a valve that allows you to generate a vacuum from a positive pressure air line. Less expensive than a vacuum pump.

1/4" NPT Thread Fittings (female)

Multi-purpose vacuum bag sealant tape that will seal easily to our vacuum bags and your mold. Clean up is simple. 1/16" x 3/8" x 50 ft. per roll (1.6mm x 9.5mm x 15.4m)

High tack sealant tape that is wider and thicker than our AT-199. Excellent clean up. Roll size is 1/8" x 1/2" x 25 ft. (3.2mm x 12.7mm x 7.62m)

Econotac 2 is an economical rubber based contact spray adhesive, designed for temporary bonding applications.
Econotac 2 can be used to hold dry fabric, core and processing materials in place when utilizing resin infusion and other composite fabrication processes.
Econotac 2 has a wide conical spray pattern for ...

Nylon film, resistant to polyesters, epoxies and vinylester with excellent elongation and strength for contours. .0015 x 60" x 1000 ft.

*  Please Note:  Our shipping calculator recognizes fiberglass, vacuum bagging materials and ...

Nylon film, resistant to polyesters, epoxies and vinylester with excellent elongation and strength for contours. .0015 x 60/120" c fold x 500 ft.

*  Please Note:  Our shipping calculator recognizes fiberglass,

Econolease is a silicone treated nylon peel ply which provides greater release in difficult environments.

Our Econo peel plies are designed to work in resin infusion or hand lay-up processes. All coated peel plies have the potential to transfer.  Roll size .0015 x 60" x 100 yards.

A heavier version of our Econo Ply J, used when extra strength is needed for removal. An excellent texture to the laminate surface is acheived, avoiding sanding/abraiding as a surface prep. 60"x 250 yd/roll

*  Please Note:  Our ...

A tight weave all white polyester peel ply to texture the laminate surface, avoiding sanding or abraiding as a surface prep for painting or bonding. 60" x 100 yards

*  Please Note:  Our shipping calculator recognizes fiberglass, vacuum ...

An open weave nylon peel ply with a red tracer, untreated, to texture laminate surface avoiding sanding or abraiding as a surface prep for painting or bonding. 60" x 25 yards

*  Please Note:  Our shipping calculator recognizes ...

Lightweight breather that allows you to pull "full" vacuum and remove volatiles without vacuum trap off that can warp laminates. 60" x 100 yards

*  Please Note:  Our shipping calculator recognizes fiberglass, vacuum bagging

Efficiently distributes resin with little waste due to the low profile, tight construction. 41” x 350 ft

used to connect polyethylene tubing and/or spiral wrap together, to make your network of vacuum infusion lines to the laminate. "Barbed" ends enable a secure union with only a press fit. Available in "T's", 90 degree elbows, and straight couplings of various sizes.