Noahsmarine Supplies *(Short Strip Kits - Courier shipping only) see kit page for details.



Product Groups
Brand List


Product Groups A-Z


3m Finesse It Ii Finishing Material
3m Bondo Fillers
3m 5" Hookit Discs Dustfree
6" Dustfree
3m Superbuff Polishing Pads
Fairing Sheets 4-1/2" X 30"
Cream Hardeners
3m 6" Purple Clean Hookit Discs
3m High Strength Repair Filler
Waxes
3m Premium Filler
3m Short Strand Repair Filler
3m Softback Sanding Sponge
Non Skid Tapes
3m 5" Purple Clean Hookit Discs



Most Popular Designs

GLEN-L BULL'S EYE PLANS & PATTERNS

GLEN-L BULL'S EYE PLANS & PATTERNS

The BULL'S-EYE utilizes Fast-G Stitch and Glue construction; the plywood planking is cut from standard 4' x 8' panels, assembled flat on the ground, and folded to form the boat. A pattern is furnished for virtually all contoured parts. More than 25 full-size patterns, including planking. Just lay the patterns over the ...

Your Price: $ 123.95 per EACH
Qty:    Buy this item
Add to Wish List
More Info

GLEN-L CLASS AB PLANS & PATTERNS

GLEN-L CLASS AB PLANS & PATTERNS

CLASS A-B racing runabout was designed to fit into APBA racing classes that are no longer active. It's not a toy, but a full-fledged racing boat. Speed potentials are fantastic! Straightaway runs in excess of 60 mph have been attained in Class "A", and over 70 mph in Class "B"! Obviously such speeds ...

Your Price: $ 77.73 per EACH
Qty:    Buy this item
Add to Wish List
More Info

GLEN-L CLASS CD PLANS & PATTERNS

GLEN-L CLASS CD PLANS & PATTERNS

Length 13'-2", Beam 5'-2", Depth amidships 16", Hull Weight 135lbs. Power outboard motor to 40HP. Hull type: high speed monoplane bottom with wide, flaring, antistrp chine sides, canted decks combined with wedge shaped platforms minimize frontal resistance. all surfaces are developed for sheet plywood planking. Structure: ...

Your Price: $ 95.59 per EACH
Qty:    Buy this item
Add to Wish List
More Info

GLEN-L CLASS J PLANS & PATTERNS

GLEN-L CLASS J PLANS & PATTERNS

Characteristics Length overall 9'-0" Beam 4'-5" Hull depth 12 1/4" Hull weight (approx.): 85 lbs. Racing weight min. (boat, driver, & motor): 245 lbs. Class racing division: "J" racing runabout Hull type: Features high speed monoplane bottom with wide, flaring, anti-trip chine ...

Your Price: $ 68.27 per EACH
Qty:    Buy this item
Add to Wish List
More Info

GLEN-L DRIFT PRAM 10' PLANS & PATTERNS

GLEN-L DRIFT PRAM 10' PLANS & PATTERNS


of our easiest and quickest designs to build, DRIFT PRAMS let you reach fishing holes bigger boats must pass by. While functionally similar to larger driftboats, they’re equally suited to lakes, bays, and other protected waters. And don’t rule them out as a ship-to-shore dinghy. Their wide, flat bottoms ...

Your Price: $ 82.98 per EACH
Qty:    Buy this item
Add to Wish List
More Info

GLEN-L DRIFT PRAM 8' PLANS & PATTERNS

GLEN-L DRIFT PRAM 8' PLANS & PATTERNS

of our easiest and quickest designs to build, DRIFT PRAMS let you reach fishing holes bigger boats must pass by. While functionally similar to larger driftboats, they’re equally suited to lakes, bays, and other protected waters. And don’t rule them out as a ship-to-shore dinghy. Their wide, flat bottoms give ...

Your Price: $ 69.32 per EACH
Qty:    Buy this item
Add to Wish List
More Info

GLEN-L DYNO MITE PLANS & PATTERNS

GLEN-L DYNO MITE PLANS & PATTERNS

Characteristics Length overall 11'-1" Beam 5'-6" Hull depth 18" Depth to coaming 24" Typical passengers 1-2 Hull weight (approx.) 125 lbs. Hull type: Vee bottom hull developed for sheet plywood and Stitch and Glue construction with built in chine flats. Power: Outboards to 25 HP. Can the hull ...

Your Price: $ 115.55 per EACH
Qty:    Buy this item
Add to Wish List
More Info

GLEN-L DYNO MITE 11' RUNNABOUT PLANS & PATTERNS

GLEN-L DYNO MITE 11' RUNNABOUT PLANS & PATTERNS

DYNO Mite is intended for a short or long shaft transom mounted outboard motor set in a self bailing motorwell. The hull features a generous 12 degree vee bottom with built in chine flats, a.k.a. spray rails, deflectors, and lift strakes. Interior longitudinal reinforcement is added after the hull is ...

Your Price: $ 115.55 per EACH
Qty:    Buy this item
Add to Wish List
More Info

GLEN-L FOLDING BOAT 10' PLANS & PATTERNS

GLEN-L FOLDING BOAT 10'  PLANS & PATTERNS


Yes, the FOLD UP does fold up into a flat bundle, 10'3" x 25" x 10".

How many times have you wished you could carry a boat to the water? Perhaps there is no launching ramp but the water is relatively close to the road. Maybe you don't have room to store a boat on a trailer. But, the flat ...

Your Price: $ 100.84 per EACH
Qty:    Buy this item
Add to Wish List
More Info

GLEN-L MINIMAXED

GLEN-L MINIMAXED

Characteristics Length overall 8'-0" Beam 4'-0" Hull depth 7 1/2" Cockpit size 5'-6" x 32" Hull weight (approx.) 70 lbs. Average passengers 1 Hull type: Arc bottom, hard chine hull developed for sheet plywood. Power: Single short shaft outboard motor to 5 HP. Can the hull be extended or shortened? No. We also do not ...

Your Price: $ 100.84 per EACH
Qty:    Buy this item
Add to Wish List
More Info

GLEN-L POWERSKIFF 12 PLANS & PATTERNS

GLEN-L POWERSKIFF 12 PLANS & PATTERNS

Characteristics 12' 14' Length overall 11'-5" 13'-5" Beam 5'-0" 5'-0" Hull depth forward 27" 27" Hull depth aft 1'-4" 1'-4" Average passengers 1-3 2-4 Hull weight (approx.): 110 lbs. 125 lbs. Hull type: Arc bottom hard chine hull in mid-to-aft areas with rounded side/bottom vee'd sections forward. Developed for Stitch and ...

Your Price: $ 113.45 per EACH
Qty:    Buy this item
Add to Wish List
More Info

GLEN-L POWERSKIFF 14 PLANS & PATTERNS

GLEN-L POWERSKIFF 14 PLANS & PATTERNS

Characteristics 12' 14' Length overall 11'-5" 13'-5" Beam 5'-0" 5'-0" Hull depth forward 27" 27" Hull depth aft 1'-4" 1'-4" Average passengers 1-3 2-4 Hull weight (approx.): 110 lbs. 125 lbs. Hull type: Arc bottom hard chine hull in mid-to-aft areas with rounded side/bottom vee'd sections

Your Price: $ 120.80 per EACH
Qty:    Buy this item
Add to Wish List
More Info

GLEN-L RC MODEL X-1 PLANS & PATTERNS

GLEN-L RC MODEL X-1 PLANS & PATTERNS


Model boat building is fun and very instructive if you intend building a full size craft. The RC MODEL X-1 uses the same principals of FAST-G (Fold And Stitch Then Glue) stitch and glue building method, only on a smaller scale. Not only will you learn but enjoy the building of a usable model ...

Your Price: $ 39.92 per EACH
Qty:    Buy this item
Add to Wish List
More Info

GLEN-L SABOTEER 10' ROW/SAIL PRAM PLANS & PAT

GLEN-L SABOTEER 10' ROW/SAIL PRAM PLANS & PAT  Length overall 9'7"
 Beam 4'8"
 Hull depth amidships 19-1/2" ...

Characteristics

  
  
  
Your Price: $ 81.93 per EACH
Qty:    Buy this item
Add to Wish List
More Info

GLEN-L SABOTINA SAILING PRAM S&G PLANS & PATT

GLEN-L SABOTINA SAILING PRAM S&G PLANS & PATT


This V-bottom dinghy is akin to the renown Sabot, using the identical rig and rudder, and fitted with a daggerboard for the Sail Version. It’s also similar in form and dimensions to the popular El Toro class. SABOTINA makes a great ship-to-shore dinghy with or without the sail rig. You can ...

Your Price: $ 63.02 per EACH
Qty:    Buy this item
Add to Wish List
More Info
  NextNext Page
 


Wish List
 




©Noah's Marine Supplies Online Store, All rights reserved.
Mail us at: noahs@noahsmarine.com