Noahsmarine Supplies *(Short Strip Kits - Courier shipping only) see kit page for details.

Search  Click here to Search

Customize your GUILLEMOT GREAT AUK 17 CEDAR STRIP KAYAK KIT

 
 
GUILLEMOT GREAT AUK 17 CEDAR STRIP KAYAK KIT

  Add this to my Cart

To take a printable version of this Kit Click here.
 
1
1
1
CANOE STRIP BUNDLE RED CEDAR 18' 60 PCS 1
EXTRA CEDAR STRIPS 1/2" 12' + L 6
Epifanes Clear Gloss Varnish 1l 2
Titebond 3 Ultimate Wood Glue 32 Oz 1
2
2
Mini Pump Set For Group A B C 1
6oz X 38" Cloth 23
6oz X 1" Fiberglass Tape 23
6oz X 2" Fiberglass Tape 12
The Bummer 1
Rapid Pulse Back Band 1
YAKIMA 14.5" FOOTBRACE RAIL (PR) 1
Yakima Touring Mounting Hardware (4 Ea) 1
YAKIMA TOURING FOOTPAD (PR) 1
YAKIMA 14.5" TOURING FOOTBRACE TRACK (PR) 1
1
Curved Tip Syringe 12cc 1
Latex Gloves 5 Pairs 1
1 Qt. Mix N Measure Container W / Ratios 2
9" Metal Tray 1
7" Cage Style Roller Frame 1
R195 Phenolic Core Foam Roller 7" 5
603 Resin Brush 1" 2
603 Resin Brush 2" 2
603 Resin Brush 3" 1
3m Gold 9" X 11" 80b 4
3m Gold 9" X 11" 120b 4
3m Gold 9" X 11" 180b 4
3m Gold 9" X 11" 240b 4
Yellow Spreader 3" X 5" 1
Brass Stem Band 46" W/12 X 4x3/4 Screws 8
Brass Flat Head #4 X 3/4" 20
Brass Eye Bolt 5/16" X 1-7/8" 1
Onyx Brush 2.5" 1
Minicell Seat Pad 3" X 24" X 24" 1
3m 5200 Fastcure White 10 Oz 1


The Following courtesy of Nick Schade, Designer,

The Great Auk is a roomy, fast and stable kayak and tracks very straight. The long water line and clean entry permits it to cut through the water with a barely visible wake. The flared bow gives a very dry ride, lifting over most waves with little effort. This is one of my more stable single sea kayaks. It is one of the easier designs to build, with a fairly simple shape. This is a good all-around boat for someone wanting a stable, efficieint kayak. This boat is designed to accept a rudder but it is not required.

Beginner kayakers will find this design to be comfortable and reliable. While not a stiff tracker, it is well balanced and with a little practice novice kayakers will be able to take this boat a long way. It will not be a design you outgrow immediately. Larger paddlers will find this design roomy and capable. It can easily carry quite a substantial load so heavier paddlers will still find it usable for multi day trips.

Design Specs:

Length: 17’
Beam: 24”
Hull Weight: 40 lbs
Max Payload: 350 lbs
Cockpit Size: 33” x 19”
Paddler Weight: 150 - 220 lbs.
Max Shoe Size: 12

About our Cedar Strip Kits

Noah’s has been supplying canoe and kayak kits for over 25 years. Our kits include absolutely everything to build yourself a beautiful cedar strip canoe or kayak. Included in the kits are all the items shown below (quantities will vary based on the design - see the kit listing above to view the actual quantities supplied in the kit.)

  • Building Instruction Book - either Canoecraft, Kayak Craft or Strip built Sea Kayak.
  • Full Size set of Building Plans.
  • Full Length Western Red Cedar Bead & Cove strips.
  • Epoxy - Either MAS, System 3, WEST or EAST System epoxy with measuring pumps.
  • Premium fiberglass cloth, rolled on a tube to cover the inside & outside of your canoe or kayak.
  • Full Length Ash Gunwales for Canoes or Ash Rub rails for Kayaks.
  • Sheer clamps (kayaks - if required.)
  • Cockpit coaming materials (either Okoume or Cedar Strips.)
  • Brass Stem Bands with brass mounting screws.
  • Brass Eye bolts.
  • Ash Deck Blanks (for Canoes.)
  • Ash Cane Seats, one small one large and seat hanging kit (for Canoes.)
  • Ash Stems - precut 1/4" x 3/4" x appropriate length.
  • Custom molded seat, backrest and knee pads in minicell foam (for Kayaks.)
  • 3" Minicell foam for bulkheads, with adhesive to attach them.
  • Hatch Cover kits (if your design has hatches) and Tie down kits.
  • Ash Sculpted (Dished) Yoke and hardware (for Canoes.)
  • Premium Epifanes Yacht Varnish with a high quality bristle Varnish Brush.
  • Premium 3M Sandpaper (4 pcs of 80, 120, 180 & 240 grit.)
  • Dural Marine Glue to glue the strips together along with a small curved tip syringe to apply the glue.
  • Plastic measuring & mixing containers.
  • Metal paint tray & 7" roller handle.
  • 5 Epoxy resistant 7" low pile foam rollers & 5 Natural bristle disposable Epoxy brushes.
  • Plastic Squeege for applying the epoxy on the fiberglass.




Additions and Substitutions

We can substitute any of the items listed above with any item in our catalog, some examples:

  • Add CNC Cut station molds to any kit.
  • Don’t like Ash? Go with Cherry or even Walnut to finish your craft.
  • Any type of epoxy is available with your kit.
  • Already have something in the kit? We’ll subtract it and adjust the price.

Please contact us for a shipping quote.

 

 

 


Wish List
 




©Noah's Marine Supplies Online Store, All rights reserved.
Mail us at: noahs@noahsmarine.com