Noahsmarine Supplies *(Short Strip Kits - Courier shipping only) see kit page for details.

Search  Click here to Search

Customize your RESOLUTE CEDAR STRIP KAYAK KIT-NO FRILLS

 
 
RESOLUTE CEDAR STRIP KAYAK KIT-NO FRILLS

  Add this to my Cart

To take a printable version of this Kit Click here.
 
1
1
1
1
OKOUME BS1088 4MM 24" x 36" (Hatch Cover Backing) 1
OKOUME BS1088 6MM 36" x 48" (Cockpit Coamings) 1
MAHOGANY SHEER CLAMPS (3/4 X 7/8 X 17') 2 PCS 1
Titebond 3 Ultimate Wood Glue 32 Oz 1
ASH RUBRAILS 1/4" X 3/4" X 17' (PAIR) 1




   

Designer's comments: Developed in response to requests from heavier and wider paddlers who also wanted a shorter boat, this stable load carrier is excellent for the novice kayaker. It will inspire confidence and lead to a continuing enjoyment of the sport. Like the 14 footer, the rocker has been reduced aft to aid in tracking ability. The beam is ample at 25.4" and the cockpit has been widened to match. The hull is a very shallow vee, the flattest of the hulls shown here to permit the width for stability and yet maintain a moderate displacement. A maximum beam of 25.4" compared with the 17 footer at 23.5" is more stable and has good load capacity. Average load is 260 lbs. but it can handle up to 340 lbs. without a problem.


 Length 16'6"
· Maximum beam 25.5"
· Beam waterline 24"
· Beam gunnel 25.5"
· Bow height 13.5"
· Centre depth 7"
· Draft 3.5"
· Displacement 260 lbs.
· Wetted surface 22.2 sq. ft.
· Weight to immerse 102 lb/in.
· Prismatic coefficient 0.569
· Weight 45 to 50 lbs
· Cockpit opening 30.5" x 18"
© Designed by Steve Killing
Steve Killing Yacht Design Inc.



 
About our "no-frills" Cedar Strip Kits

Noah’s has been supplying canoe and kayak kits for over 25 years. Our kits include absolutely everything to build yourself a beautiful cedar strip canoe or kayak. Included in the kits are all the items shown below (quantities will vary based on the design - see the kit listing above to view the actual quantities supplied in the kit.)

 

  • 6 to 9' Western Red Cedar Bead & Cove strips OR full length un-scarfed strips - quantity depends on the design - select which strips above in drop down box.
  • You may substitute Eastern White Cedar, or Bass Wood if you'd like - let us know in the notes section when placing your order. 
  • Epoxy - Either MAS, System 3, WEST or EAST System epoxy with measuring pumps.
  • Premium fiberglass cloth, rolled on a tube to cover the inside & outside of your canoe or kayak.
  • Pre Scarfed Ash Rubrails - if design calls for it. (Full Length Ash Rubrails if full length strip option is selected.)
  • Pre Scarfed Mahogany Sheer Clamps - if the design calls for it (Full Length Sheer Clamps if full length strips are ordered.)
  • Ash Stems - precut 1/4" x 3/4" x appropriate length.
  • Dural Marine Glue to glue the strips together along with a small curved tip syringe to apply the glue.
  • Plastic measuring & mixing containers.

Special Shipping information:

SHORT STRIP (6’ TO 9’) KITS :
Shipping to lower 48 and 10 provinces $ 59.95
Add $ 40.00 when station molds are added to short strip kits.

FULL LENGTH UP TO 20’ STRIP KITS:
Truck shipping including residential delivery to all direct service points in  lower 48 and 10 provinces $ 159.95.  No extra shipping charge when station molds are added to  full length kits.

 

Additions and Substitutions

We can substitute any of the items listed above with any item in our catalog, some examples:

  • Don’t like Ash? Go with Cherry or even Walnut Rubrails - additional cost applies.
  • Any type of epoxy is available with your kit - MAS, WEST, System 3 or EAST.

 

 

 

 

 


Wish List
 




©Noah's Marine Supplies Online Store, All rights reserved.
Mail us at: noahs@noahsmarine.com