Noahsmarine Supplies *(Short Strip Kits - Courier shipping only) see kit page for details.

Search  Click here to Search

Customize your GREEN VALLEY JOHN WINTERS NORTH SEA CEDAR STRIP KAYAK KIT

 
 
GREEN VALLEY JOHN WINTERS NORTH SEA CEDAR STRIP KAYAK KIT

  Add this to my Cart

To take a printable version of this Kit Click here.
 
1
1
1
CANOE STRIP BUNDLE RED CEDAR 12-13' X 45 PCS 1
EXTRA CEDAR STRIPS 1/2" 12' + L 5
Titebond 3 Ultimate Wood Glue 32 Oz 1
1
East Resin .96 L 1
1
EAST HARDENER SLOW .20 L 1
Mini Pump Set For Group A B C 1
6oz X 38" Cloth 15
6OZ X 2" TAPE 15
Creature Comfort Seat - Highback 1
YAKIMA 14.5" FOOTBRACE RAIL (PR) 1
Yakima Touring Mounting Hardware (4 Ea) 1
YAKIMA TOURING FOOTPAD (PR) 1
YAKIMA 14.5" TOURING FOOTBRACE TRACK (PR) 1
1
ASH STEMS 1/4" x 7/8" x 48" - 6 PCS 1
Curved Tip Syringe 12cc 1
Latex Gloves Pair 5
Graduated Poly Tubs 32 Oz 2
9" Metal Tray 1
7" Cage Style Roller Frame 1
R195 Phenolic Core Foam Roller 7" 5
603 Resin Brush 1" 2
603 Resin Brush 2" 2
603 Resin Brush 3" 1
3m Gold 9" X 11" 80b 4
3m Gold 9" X 11" 120b 4
3m Gold 9" X 11" 180b 4
3m Gold 9" X 11" 240b 4
PLASTIC SQUEEGES (YELLOW 3X5) 1
BRASS STEM BAND 3/32" X 3/8" 8
Brass Flat Head #4 X 3/4" 20
Brass Eye Bolt 5/16" X 1-7/8" 1
Onyx Brush 2.5" 1
Minicell Seat Pad 3/4" X 24" X 24" 1




The Following courtesy of Martin Step,

The North Sea

The North Sea is a true expedition kayak. It is designed for controllability without having to resort to a rudder, and for a cruising speed of four knots for the average paddler. The designed displacement of 325 pounds assures adequate storage space for gear. The longer a boat gets, the more sluggish it handles, so 'deadwood' has been cut back at both the bow and the stern. The North Sea handles rather nicely even in lumpy seas.

The photo below shows a production Kevlar version of the North Sea (in red) made by Swift Canoe & Kayak.

The size of this boat makes it less desirable for day paddling, and it is too much of a handful for smaller paddlers. But, if you take long trips or pack heavily, the North Sea is a good boat.


Design Specs:

Length: 15’ 4-1/2”
Beam: 24”
Hull Weight: 45 lbs
Max Payload: 325 lbs
Paddler Weight: 130 - 250 lbs.



About our Cedar Strip Kits

Noah’s has been supplying canoe and kayak kits for over 25 years. Our kits include absolutely everything to build yourself a beautiful cedar strip canoe or kayak. Included in the kits are all the items shown below (quantities will vary based on the design - see the kit listing above to view the actual quantities supplied in the kit.)

  • Building Instruction Book - either Canoecraft, Kayak Craft or Strip built Sea Kayak.
  • Full Size set of Building Plans.
  • Full Length Western Red Cedar Bead & Cove strips.
  • Epoxy - Either MAS, System 3, WEST or EAST System epoxy with measuring pumps.
  • Premium fiberglass cloth, rolled on a tube to cover the inside & outside of your canoe or kayak.
  • Full Length Ash Gunwales for Canoes or Ash Rub rails for Kayaks.
  • Sheer clamps (kayaks - if required.)
  • Cockpit coaming materials (either Okoume or Cedar Strips.)
  • Brass Stem Bands with brass mounting screws.
  • Brass Eye bolts.
  • Ash Deck Blanks (for Canoes.)
  • Ash Cane Seats, one small one large and seat hanging kit (for Canoes.)
  • Ash Stems - precut 1/4" x 3/4" x appropriate length.
  • Custom molded seat, backrest and knee pads in minicell foam (for Kayaks.)
  • 3" Minicell foam for bulkheads, with adhesive to attach them.
  • Hatch Cover kits (if your design has hatches) and Tie down kits.
  • Ash Sculpted (Dished) Yoke and hardware (for Canoes.)
  • Premium Epifanes Yacht Varnish with a high quality bristle Varnish Brush.
  • Premium 3M Sandpaper (4 pcs of 80, 120, 180 & 240 grit.)
  • Dural Marine Glue to glue the strips together along with a small curved tip syringe to apply the glue.
  • Plastic measuring & mixing containers.
  • Metal paint tray & 7" roller handle.
  • 5 Epoxy resistant 7" low pile foam rollers & 5 Natural bristle disposable Epoxy brushes.
  • Plastic Squeege for applying the epoxy on the fiberglass.




Additions and Substitutions

We can substitute any of the items listed above with any item in our catalog, some examples:

  • Add CNC Cut station molds to any kit.
  • Don’t like Ash? Go with Cherry or even Walnut to finish your craft.
  • Any type of epoxy is available with your kit.
  • Already have something in the kit? We’ll subtract it and adjust the price.

Please contact us for a shipping quote.

 

 

 


Wish List
 




©Noah's Marine Supplies Online Store, All rights reserved.
Mail us at: noahs@noahsmarine.com