Noahsmarine Supplies *(Short Strip Kits - Courier shipping only) see kit page for details.

Search  Click here to Search

Customize your PROSPECTOR CEDAR STRIP CANOE KIT

 
 
PROSPECTOR CEDAR STRIP CANOE KIT

  Add this to my Cart

To take a printable version of this Kit Click here.
 
1
1
1
Cedar (Red) Strip Bundle 16 - 17' (64pc) 1
Cedar (Red) Strip Bundle 16 - 17' (8 Pc) 1
Titebond 3 Ultimate Wood Glue 32 Oz 1
2
2
Ark 5:1 Pump Set 1
6oz X 60" Cloth 11
Epifanes Clear Gloss Varnish 1l 2
1
1
1
2
Seat Hangers - Ash Dowells 8
Silicon Bronze Carriage Bolt 3/16 X 6" 12
Silicon Bronze Hex Nuts 10-24 12
9" Metal Tray 12
7" Cage Style Roller Frame 12
R195 Phenolic Core Foam Roller 7" 12
603 Resin Brush 1" 12
603 Resin Brush 2" 12
603 Resin Brush 3" 12
Yellow Spreader 3" X 5" 12
Flat Head Tapp #8 X 3/4" 12
Flat Head Tapp #8 X 1-1/4" 12
1 Qt. Mix N Measure Container W / Ratios 12
Brass Stem Band 4' Inc 12 X 4x3/4 Screws 12
Brass Flat Head #4 X 3/4" 12
Brass Ring 1" 12
Brass Eye Strap 3/8" X 1 3/8" 12
Brass Flat Head #6 X 1" 12
Deck Blanks 2 Pcs Ash 18" X 5" X 3/4" 12
Onyx Brush 2.5" 12
3m Gold 9" X 11" 80b 12
3m Gold 9" X 11" 120b 12
3m Gold 9" X 11" 180b 12
3m Gold 9" X 11" 240b 12
Ash/Pine Stems 1/4" X 7/8" X 48"-12 Pcs 12
Curved Tip Syringe 12cc 12
Latex Gloves 5 Pairs 12


Prospector

The Chestnut Canoe Company built this "workhorse of the North" to meet the specific needs of the prospector - good maneuverability through whitewater and wilderness, with capacity to carry substantial loads. The 16' Prospector features a flattened, shallow arch hull with its fullness carried into the bow and stern, good depth amidships to maintain freeboard and deepened ends to keep paddlers and gear dry. The rockered keel-line makes it very maneuverable in whitewater. This was the favoured canoe of the late Bill Mason, Canada's premier paddler..."it is amazing that such a large-volume tripping canoe can also be so beautiful to paddle solo in the leaned position - canoe ballet, as I call it. It is the ideal all-round canoe."

Length 16'
Maximum beam 35"
Beam waterline 33.25"
Bow height 19.25"
Centre depth 13.25"
Displacement 420 lbs.
Draft 4"
Wetted surface 27.2 sq.ft.
Weight to immerse 120 lb/in
Prismatic coefficient 0.510
Weight 55 to 60 lbs
Keel-less or shoe keel



 
About our Cedar Strip Kits

Noah’s has been supplying canoe and kayak kits for over 25 years. Our kits include absolutely everything to build yourself a beautiful cedar strip canoe or kayak. Included in the kits are all the items shown below (quantities will vary based on the design - see the kit listing above to view the actual quantities supplied in the kit.)

  • Building Instruction Book - either Canoecraft, Kayak Craft or Strip built Sea Kayak.
  • Full Size set of Building Plans.
  • Full Length Western Red Cedar Bead & Cove strips.
  • Epoxy - Either MAS, System 3, WEST or EAST System epoxy with measuring pumps.
  • Premium fiberglass cloth, rolled on a tube to cover the inside & outside of your canoe or kayak.
  • Full Length Ash Gunwales for Canoes or Ash Rub rails for Kayaks.
  • Sheer clamps (kayaks - if required.)
  • Cockpit coaming materials (either Okoume or Cedar Strips.)
  • Brass Stem Bands with brass mounting screws.
  • Brass Eye bolts.
  • Ash Deck Blanks (for Canoes.)
  • Ash Cane Seats, one small one large and seat hanging kit (for Canoes.)
  • Ash Stems - precut 1/4" x 3/4" x appropriate length.
  • Custom molded seat, backrest and knee pads in minicell foam (for Kayaks.)
  • 3" Minicell foam for bulkheads, with adhesive to attach them.
  • Hatch Cover kits (if your design has hatches) and Tie down kits.
  • Ash Sculpted (Dished) Yoke and hardware (for Canoes.)
  • Premium Epifanes Yacht Varnish with a high quality bristle Varnish Brush.
  • Premium 3M Sandpaper (4 pcs of 80, 120, 180 & 240 grit.)
  • Dural Marine Glue to glue the strips together along with a small curved tip syringe to apply the glue.
  • Plastic measuring & mixing containers.
  • Metal paint tray & 7" roller handle.
  • 5 Epoxy resistant 7" low pile foam rollers & 5 Natural bristle disposable Epoxy brushes.
  • Plastic Squeege for applying the epoxy on the fiberglass.




Additions and Substitutions

We can substitute any of the items listed above with any item in our catalog, some examples:

  • Add CNC Cut station molds to any kit.
  • Don’t like Ash? Go with Cherry or even Walnut to finish your craft.
  • Any type of epoxy is available with your kit.
  • Already have something in the kit? We’ll subtract it and adjust the price.

Please contact us for a shipping quote.

 

 

 


Wish List
 




©Noah's Marine Supplies Online Store, All rights reserved.
Mail us at: noahs@noahsmarine.com