Noahsmarine Supplies *(Short Strip Kits - Courier shipping only) see kit page for details.

Search  Click here to Search



  Add this to my Cart

To take a printable version of this Kit Click here.
Titebond 3 Ultimate Wood Glue 32 Oz 1
East Resin .96 L 1
East Intermediate Hardener .19 L 1
Ark 5:1 Pump Set 1
6oz X 50" Cloth 9
Epifanes Clear Gloss Varnish 1l 2
Brass Carriage Bolt 3/16 X 4" 4
Silicon Bronze Hex Nuts 10-24 4
9" Metal Tray 4
7" Cage Style Roller Frame 4
R195 Phenolic Core Foam Roller 7" 4
603 Resin Brush 1" 4
603 Resin Brush 2" 4
603 Resin Brush 3" 4
Yellow Spreader 3" X 5" 4
Flat Head Tapp #8 X 3/4" 4
Flat Head Tapp #8 X 1-1/4" 4
1 Qt. Mix N Measure Container W / Ratios 4
Brass Stem Band 4' Inc 12 X 4x3/4 Screws 4
Brass Flat Head #4 X 3/4" 4
Brass Eye Bolt 5/16" X 1-7/8" 4
DECK BLANKS 2 PCS ASH 18" X 12" X 3/4" 4
Onyx Brush 2.5" 4
3m Gold 9" X 11" 80b 4
3m Gold 9" X 11" 120b 4
3m Gold 9" X 11" 180b 4
3m Gold 9" X 11" 240b 4
Curved Tip Syringe 12cc 4
Latex Gloves 5 Pairs 4

Wee Two

The Following courtesy of Rob Macks, Designer

Wee Two's light weight and small size make it a Tandem boat that's a dream. For the fisherman or explorer it's an easy boat to get to those seemingly inaccessible ponds. Or it's just that little "ready to go" boat for a local moonlight paddle.

Another of my designs inspired by Henry Rushton's Wee Lassie, circa 1893, Wee Two is a small tandem or solo craft of light weight. At 32 Ibs., this is the ideal boat for a small person or someone who just doesn't want to hurt themselves lifting a heavy boat.This boat style is called a double paddle canoe, because it is paddled with a kayak paddle, in a seated position.

You don't have to be small to paddle a Wee Two. It can handle up to 350 lbs. with ease. Wee Vera can also be set up to accommodate two children quite comfortably. The bow and stern of Wee Two is built with air tanks, for extra flotation and small decks with a built-in hand hold for carrying. Two broad flattened sculpted thwarts are the standard back rest in the Wee Two.

The Wee Two is A terrific first boat project for someone interested in learning the wood strip boat building technique! It's small size and simple shape make it easy to build for the beginner. This boat is a kick because it is so light-weight! Any boat lover would be proud to own a Wee Two.

It has a flattened arch hull bottom with a firm chine for very good initial stability. The bow and stern stems form a sharp vee underwater to improve tracking in wind. The flare of the bow and stern at the sheer line deflects waves for a dry ride in waves. The short length and flattened bottom makes this canoe easy to turn.

Stability is good enough on the Wee Two to set it up as a traditional canoe with seats at the the gunnels if you wish.

I have learned to respect this little boat's capacity and speed. As a builder, I have a lot of personal boats to choose from. I would never be without a Wee Two in my fleet.

Length: 12'6"
Width: 30"
Depth in center: l0"
Weight: 30-32 lbs

About our Cedar Strip Kits

Noah’s has been supplying canoe and kayak kits for over 25 years. Our kits include absolutely everything to build yourself a beautiful cedar strip canoe or kayak. Included in the kits are all the items shown below (quantities will vary based on the design - see the kit listing above to view the actual quantities supplied in the kit.)

  • Building Instruction Book - either Canoecraft, Kayak Craft or Strip built Sea Kayak.
  • Full Size set of Building Plans.
  • Full Length Western Red Cedar Bead & Cove strips.
  • Epoxy - Either MAS, System 3, WEST or EAST System epoxy with measuring pumps.
  • Premium fiberglass cloth, rolled on a tube to cover the inside & outside of your canoe or kayak.
  • Full Length Ash Gunwales for Canoes or Ash Rub rails for Kayaks.
  • Sheer clamps (kayaks - if required.)
  • Cockpit coaming materials (either Okoume or Cedar Strips.)
  • Brass Stem Bands with brass mounting screws.
  • Brass Eye bolts.
  • Ash Deck Blanks (for Canoes.)
  • Ash Cane Seats, one small one large and seat hanging kit (for Canoes.)
  • Ash Stems - precut 1/4" x 3/4" x appropriate length.
  • Custom molded seat, backrest and knee pads in minicell foam (for Kayaks.)
  • 3" Minicell foam for bulkheads, with adhesive to attach them.
  • Hatch Cover kits (if your design has hatches) and Tie down kits.
  • Ash Sculpted (Dished) Yoke and hardware (for Canoes.)
  • Premium Epifanes Yacht Varnish with a high quality bristle Varnish Brush.
  • Premium 3M Sandpaper (4 pcs of 80, 120, 180 & 240 grit.)
  • Dural Marine Glue to glue the strips together along with a small curved tip syringe to apply the glue.
  • Plastic measuring & mixing containers.
  • Metal paint tray & 7" roller handle.
  • 5 Epoxy resistant 7" low pile foam rollers & 5 Natural bristle disposable Epoxy brushes.
  • Plastic Squeege for applying the epoxy on the fiberglass.

Additions and Substitutions

We can substitute any of the items listed above with any item in our catalog, some examples:

  • Add CNC Cut station molds to any kit.
  • Don’t like Ash? Go with Cherry or even Walnut to finish your craft.
  • Any type of epoxy is available with your kit.
  • Already have something in the kit? We’ll subtract it and adjust the price.

Please contact us for a shipping quote.




Wish List

©Noah's Marine Supplies Online Store, All rights reserved.
Mail us at: