Noah's Photo Gallery

Our customers projects

Category Albums Files
Customer images added by Noah'sThese are pic's that we've received over the years from our customers
32 300
U of T Supermileage car


Hi Noah's,
I hope all is well with you. I just wanted to provide you with a quick update on the Supermileage Team and how the vehicle turned out. We competed in the Shell Eco-Marathon this past April in Houston, Texas. On and off the track we ran into a number of problems that we had never encountered when testing the vehicle. Driver communication was our biggest issue and as a result we were unable to place.

In a preliminary run, our vehicle achieved 626mpg, which would have placed us around 13th out of 60 teams in our class. After all the issues we faced that negatively affected our performance/mileage, we are pleased with what we have produced as a first year team and have already begun in the design of next year's vehicle. I am very confident in my team and our ability to produce a winning car for next year’s competition.

None of this would be possible without your help with the carbon fiber sponsorship and I would like to take this opportunity to thank you once again for the continued support. Please see attached for a few photos of the final vehicle and a shot of us laying the carbon over our mold.

Jonathan Hamway

9 files, last one added on Oct 16, 2013
Album viewed 560 times

1965 VW Westfalia


2 files, last one added on Oct 26, 2012
Album viewed 884 times

1959 14' Plywood Boat Restoration


Hello all! New member here...I'm Mike, 30 years old, from Buffalo, NY doing a restoration to a 1959 hand built 14' plywood boat. I acquired this back in October and spent a month or so stripping it down to bare wood. I spent the winter remodeling my kitchen, and am now getting back to the boat. I'll fill you in with the progress so far...mind you these photos date back to October-December.

The boat was hand built by the father of a lady I work with. I don't know his name, but know that is was based off of drawings from Popular Science Magazine. He used it up until about 25 years ago...then it went into 10 years of storage...then 8 years under the ownership of my boss who had to refinish it, then the past 2 years in the barn.

Eventually this boat will end up in northern Minnesota at my parents cabin where it can be reunited with the '55 Chevy I'd really like to get a few years out of this and then hand it off to them...and then build another one for myself, something a little larger that could handle rougher water conditions and more people.

52 files, last one added on Jul 27, 2013
Album viewed 1321 times

Glen-L Super Spartan


Glen-L super spartan made using plywood from Noah`s

5 files, last one added on Oct 26, 2012
Album viewed 1313 times

corecell skimboards


Hello everyone at Noah’s,
This past January I was in your Toronto shop getting my latest supplies for my winter project of 2 skimboards that I was building with my 14 year old son Alex.

I wanted to share a Noah’s “success story” with you as I had purchased all of my materials of corecell, glass & East Epoxy from you, as well to say thank you as getting such valuable advice from your staff.

Skimboards are like small surfboards but without the skegs and you do it at the water’s edge. There are 2 forms of the sport – 1 like skateboarding on the water and the other like surfing but you are “skimming” out from the shoreline to catch a wave to ride back in on.

The pdf file attached shows some of process and the picture is of my son with his 2 new boards.

Thanks very much for all your help – you would be surprised at how a few words of advice from your staff carry over to the success of a project.

P.S. Next year we’ll probably “upgrade” to corecell & carbon fibre.

Cheers, Paul

2 files, last one added on Aug 21, 2012
Album viewed 1189 times

1981 Allison craft restoration


If it wasn't for you guys and all your help and great advice and materials this project would not have turned out as good as it did. Well we finally finished it and I wanted to share the results as we are pretty proud of the job and never mind the performance he is getting. We had hoped for speed in the range of 68 - 72 mph and are currently running in the 77-78 mph, not bad for a 30 year old boat and 25 year old motor.

8 files, last one added on Sep 15, 2012
Album viewed 717 times



1 files, last one added on Aug 10, 2012
Album viewed 682 times

north canoe class project


6 files, last one added on Sep 15, 2012
Album viewed 697 times

epifanes painted canoe


Hi there. Hope you are all doing well.

Last summer, I purchased marine paint at Noah’s for the cedar canvas canoe I built.

At that time, you requested that I provide some photos once completed.

Please find attached, as requested. Happy to provide others too, if you’d like to see more of it.

Thank you again for all of your help, encouragement, advice and expertise.

Take care, Melissa Thomson

2 files, last one added on Sep 15, 2012
Album viewed 836 times

1955 Trojan Sea Queen


Here is a 1955 Trojan Sea Queen I restored for a customer. All new bottom and sides using Noah's for the plywood. Engine is a 1958 Johnson Super Sea Horse. Scarf joints about mid-ships.

4 files, last one added on Sep 29, 2012
Album viewed 613 times

Winisk Canoe


In 2007 I started work on a cedar strip canoe and just got around to completing it. It is a 17 1/2 ft Winisk from Green Valley. Though I purchased the plans direct from Green Valley, I purchased a lot of the initial supplies at Noah's and so thought I'd mention it here.

Seth Murray

24 files, last one added on Sep 29, 2012
Album viewed 788 times

17' cypress endeavor


2 files, last one added on Sep 29, 2012
Album viewed 851 times

Steve's Cedar Strip Canoe


27 files, last one added on Dec 22, 2012
Album viewed 1250 times

Dave's Solo Portage


Still adding coats of varnish and have a couple of details to clean up that won't change the look. I'll send another photo or two when I get it on the water.

1 files, last one added on Aug 10, 2013
Album viewed 796 times

Jim's Family of Kayaks


Here are pictures of my kayaks. I have built one for myself, my wife, my son and this winter as a graduation gift for the son of a friend.
Jim MacAlpine

2 files, last one added on Jan 07, 2013
Album viewed 893 times

Steve Bosco's Nomad


your kit was wonderful to build...everything was there and extra....canoe craft by Ted Moore made it a are some pictures.

Steve Bosco

8 files, last one added on Jul 20, 2013
Album viewed 945 times

clark's canoe


The attached pics of my yacht show off the treatment I did on the keel line. Building a strip canoe is like being pregnant - once you have the baby - you forget about the 9 months of pregnancy. Now that all the work is over and the canoe is ready to launch - all that sanding is only a fleeting memory - I love my boat!!!!!!

4 files, last one added on Oct 27, 2012
Album viewed 926 times

Glen-L Sweet Caroline


2 files, last one added on Oct 27, 2012
Album viewed 646 times

1967 Morgan 34


I am in the process of restoring my 1967 Morgan 34 sailboat.

The deck was stripped of all hardware and prepared according to Epifanes guidelines: 2 coats of Epifanes epoxy, the second coat sanded with 220 grit.

The paint was rolled on, and not tipped. The only departure from spec's was the use of Bristol Tropical Reducer in combination with Epifanes's reducer, to obtain a longer open time.

2 coats were applied on the first day, and a 3rd coat, without sanding, on the second day. Only smooth areas of the cabin top, toe rail area and cockpit were painted, with the anti-skid areas masked off.

Of note: on the day before painting all nonskid areas were painted with a solvent resistant, short nap roller (smooth masked off) using Epifanes
epoxy primer. Rolling in the same direction, and until tacky, yielded a consistent textured pattern that I was looking for. This will be painted with one coat of Epifanes 2 part polyurethane and a second one with the antiskid grit.

The ease of use of Epifanes 2 part polyurethane, and result, exceeded my expectations by far, as I had used Sikkens moisture cure poly on a similar job.

5 files, last one added on Sep 29, 2012
Album viewed 537 times

"Powerful" Restoration


restoration of "powerful"

8 files, last one added on Dec 29, 2012
Album viewed 477 times

Cajon Drums


Cajon Drums made using plywood from Noah's

3 files, last one added on Oct 27, 2012
Album viewed 393 times

Suzy Q


5 files, last one added on Oct 27, 2012
Album viewed 755 times

Power of One solar car


Solar Car by Marcello de Luz. built with corecell, epoxy, carbon and fiberglass.

3 files, last one added on Oct 27, 2012
Album viewed 385 times



2 files, last one added on Oct 27, 2012
Album viewed 479 times

Tolman Skiff


The boat is a Tolman skiff with my own superstructure.
The boat is made with Meranti plywood, construction grade spruce and one engineered plywood beam for stringers. There are no ribs and almost no screws. The only structural screws are those holding the bottom to the stringers. All others used in construction were removed and holes back filled. The boat is glued together with Silvertip. Hand measured 2:1 with your cups. Lots of cotton fiber not so much Cabosil.
System 3 Silvertip epoxy was superb to use. I used about 4 gal more than Renn Tolman says is needed because I was a rookie and built the superstructure extra.
Most useful tool,Makita 7 inch disc sander.
All hardware is scavenged from other boats especially an old 1960's Chris Craft, even some of the stainless screws and the steering wheel.
The power is a 1996 Evinrude 115 hp engine. 70 hp max is recommended. I have reinforced the transom .The present max speed is about 34mph.
I would be happy to discuss with any potential builder. it was the first time I scarfed anything, used Epoxy etc. I was a true rookie.
Happy to discuss. Your team was very helpful especially to a nervous new builder.

Eric Barker

24 files, last one added on Aug 10, 2013
Album viewed 768 times

Peter Code's Canada Day Boat


Thanks for doing this:

The paint is Epifanes, S1 was applied first, then Sika Flex 292 slow in the seams - hasn't leaked a drop in 2 years. Interior, masts and oars are Cetol Teak.

2 files, last one added on Jan 07, 2013
Album viewed 574 times

Okoume Telescope


world's lightest 8 inch astrograph made from okoume plywood and carbon fiber.

5 files, last one added on Apr 20, 2013
Album viewed 419 times

Christine's Apple Pie Dinghy


I just completed a new Stitch and Glue tender for my Tanzer 22. She was launched on Monday and is a great success.
It took about 125 hours to complete. I could have made it much faster but I also added a sailing rig (mast, spars, sail, daggerboard, rudder assembly and tiller) to her.

She rows beautifully even with very short oars.

36 files, last one added on Jul 20, 2013
Album viewed 609 times

Grade 12 Project


Canoe built for Gr. 12 woodworking project 2004.

2 files, last one added on Jan 07, 2013
Album viewed 755 times



1 files, last one added on Aug 10, 2012
Album viewed 790 times

15' Skerry Build


I built a Chesapeake Light Craft Skerry from stuff I got from Noahs.
I've been sailing it for 2 summers now and it is fabulous.

39 files, last one added on Aug 03, 2013
Album viewed 698 times

Basement Renovation


basement residence renovation where east system epoxy, fiberglass, carbon/kevlar hybrid and marine grade plywood from Noah's were used.

4 files, last one added on Sep 09, 2013
Album viewed 469 times

32 albums on 1 page(s)

Canoes & Kayaks
Our Customers and Their Projects
Household DIY Projects
3 0
Indoor DIY's

0 files
Album viewed 0 times

Outdoor DIY's

0 files
Album viewed 0 times

Other DIY's

0 files
Album viewed 0 times


3 albums on 1 page(s)

Art & Associated
1 0
Art & Associated

0 files
Album viewed 1 times


1 albums on 1 page(s)

2 0
Small Restorations

0 files
Album viewed 0 times

Large Restorations

0 files
Album viewed 0 times

2 albums on 1 page(s)

Canoes and Kayaks
2 21


17 files, last one added on Sep 07, 2015
Album viewed 830 times



4 files, last one added on Feb 16, 2014
Album viewed 720 times

2 albums on 1 page(s)

Small Builds
1 0
Small Builds

0 files
Album viewed 1 times


1 albums on 1 page(s)

Large Builds
1 0
Large Builds

0 files
Album viewed 0 times


1 albums on 1 page(s)

1 0

0 files
Album viewed 0 times


1 albums on 1 page(s)

321 files in 43 albums and 10 categories with 13 comments viewed 157,584 times

Random files
primed534 views
Jim's family of kayaks790 viewskayaks made for himself and his family in 2009
177 viewsI spent some time getting a pattern for the middle seat following the curve of the bottom.

Here I'm modifying the original plan to make a more substantial middle seat and to house the daggerboard and mast step. The parts have been cut and coated with epoxy.
383 viewsInterior shot...before cleaning. The seat cushions were destroyed and thrown in the trash before I picked her up.
325 viewsAnd getting started with scraping the paint away...this was maybe 1.5 hours or so of putzing around.
206 viewsSanding stern
guillemot and me578 viewsI built this 17foot Guillemot Kayak in 1999 from a kayak kit I bought from Noah's. It won first prize in the Erin Fall Fair that year for best woodworking project! It is a great kit and a fun boat to paddle!
433 views1 comments

Last additions
929 views1 commentsSep 07, 2015
1164 views1 commentsSep 07, 2015
645 views1 commentsSep 07, 2015
970 views1 commentsSep 07, 2015
583 views1 commentsSep 07, 2015
567 views1 commentsSep 07, 2015
764 views1 commentsSep 07, 2015
644 views1 commentsSep 07, 2015