Hello and welcome to our community! Is this your first visit?
Register
Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Sep 2010
    Posts
    1

    Questions about building kevlar canoe

    I was hoping someone could provide some advice about the products on this site and hopefully some knowledge about canoe building.

    I was thinking a carbonfiber core sandwiched between two layers of kevlar, but I've been reading that the kevlar may not be ideal for the hull, so perhaps a carbon core sandwiched between kevlar and sglass would be more appropriate?

    I am in the early planning stages and have a number of questions.

    1) Is this kevlar suitable for a canoe? I notice that it's significantly cheaper than the other fabrics:
    http://www.noahsmarine.com/itemdesc....=5x38K&eq=&Tp=

    2) Also, would you suggest the 6oz or the 12oz for the carbon fiber core? Is carbon fiber suitable at all for that matter.

    3) Is the carbon/kevlar hybrid fabric suitable for canoe hulls?

    4) And lastly, do you know how many layers I should use ? Is 1 carbon and 2 kevlar enough? too much?

    Again, thank you again in advance for any information you can provide.

  2. #2
    Join Date
    Mar 2001
    Posts
    399
    This is not something that can be covered in a couple of paragraphs. For a start try reading "Building Your Kevlar Canoe” available at Noah’s.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •